Posts

Top 5 Reasons to use Memex MERLIN MES for OEE & DNC

Serial communications is old outdated technology.  It has slow transfer speeds, it is slow to load today’s big programs into controls, and it is especially unreliable on long distance runs.  MERLIN is built on today’s modern, reliable IT Ethernet network structure.

To help deliver operational efficiency with production visibility to your manufacturing enterprise, here are the top 5 reasons to work with the award winning Memex MERLIN for OEE and DNC.

1)  Memex MERLIN is a true Manufacturing Execution System.

  • MERLIN MES is vertically and horizontally integrated across the enterprise.
    • Vertically integrated means that it executes ERP’s planned production schedule.  It takes all the work orders from your ERP system, mirrors them on a machine and manufacturing cell or assembly basis, and at completion (end of work order and end of shift) sends the ERP an upload of actual results on how production actually ran.  This enables a comparison to be made of how the production ran for an accurate time and cost picture.
    • Horizontally integrated means that the complete shop floor flow-line of production is viewed and communicated in real-time.  This enables situational analysis, bottleneck identification, and resources to be allocated (when and where they’re needed) in the shortest period of time –  all with historical, traceable reporting.
    • Integration means objective visibility about utilization.  True OEE metrics, product run and cost standards, and the requirements of the operator for resources (engineering, maintenance, crane, dunnage, 1st off quality check, etc.) can all be communicated to all stakeholders in real-time.

2)  MERLIN is an independent and unobtrusive monitoring solution.

  • Software protocols and hardware network connectivity (if required) that are electrically (optically) isolated from the control.
  • MERLIN does not affect the machine’s performance.  It does not use programs or memory, it simply listens to the machine.

3)  Memex MERLIN system can operate independent of any DNC solution.

  • Any existing DNC solutions in your site can still be used in conjunction with MERLIN
  • Or, if you  prefer, you can use MERLIN’s built in DNC.

4)  MERLIN is built on the latest & proven technology of the Microsoft platform.

  • MERLIN incorporates MTConnect, OPC, Focas and other advanced protocols for machine communication.
  • It is built on reliable Ethernet network (wired or wireless) rather than the older, slower, and unreliable serial based communication technology.

5)  Memex MERLIN system really is the BEST VALUE solution.

  • MERLIN has delivered our customers 10% to 50% or more improvement in efficiency, all thanks to its horizontal and vertical integration,
  • It adheres to ISA-95 standards of machine connectivity and fits with your IT network infrastructure.
  • It is a safe and proven technology that is being used globally.

To find out more about these 5 points, and even more reasons why Memex MERLIN is the best MES solution, contact Memex sales today at 866-573-3895 or via email to salesgroup@memex.ca

To learn more about Memex’s MERLIN, check out these short videos on topics covered in Memex’s OEE Solution Series webinars.

Memex Working with Consortium of Universities on Dynamic Computer Aided Machining (DCAM) Project

Memex announces that it has been awarded a significant grant to work on a state of the industry dynamic computer aided machining (DCAM) project in a consortium with leading universities, aerospace companies and industry partners. This is a five year grant from NSERC and will have Memex’s Ax9150 hardware board as a key component in delivering results. The benefits of this project are to improve quality in the final pass of machining, so as reduce by 50% the cycle time, minimizing broken tools, increase efficiency overall by 35% and provide an accurate audit validation trail. This validates Memex’s position as a leading technology supplier to the machining industry working with the top universites, such as McMaster in delivering advanced products for manufacturing efficiency.

Memex Adopts New XML Connectivity Standard MTConnect

The next evolution in manufacturing connectivity was unveiled by Memex Automation Inc. and MatrikonOPC™, the world’s largest OPC connectivity provider, at the International Manufacturing Technology Show (IMTS) held this week in Chicago. Utilizing MatrikonOPC’s standards-based connectivity, Memex is now able to connect virtually all CNC machine tools leveraging our Dynamic Computer Aided Machining (DCAM) model. Our goal is to provide a universal machine interface that makes every machine a node on the corporate network.

Production Managers can now monitor the status of every machine in their plant, giving real time visibility of production. The benefits of machine monitoring and Overall Equipment Effectiveness (OEE) numbers lead directly to increased productivity. Our customers have seen up to 20% increase in shop floor efficiency, delivering more value than the cost of a new machine. Large multi-national manufacturers and leading aerospace companies have started adopting this technology. It’s like a low cost retrofit – we now can start Automating the Automation.